HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI Switch (Must select min 1 power supply) JH323A RENEW jen rozbaleno

Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding. These switches provide four 10-Gigabit Ethernet (10GbE) interfaces and use IRF (Intelligent Resilient Fabric) technology to virtualize multiple switches into one, enhancing resilience and ease of management. These switches offer high availability, simplified management, robust security policies, and support for dual modular power supplies. They are suitable for edge deployments and small data center server aggregation.

Key Features

Scalable 10GbE uplinks and 9-chassis IRF with 80 GB/s stacking PoE+ (30W per port) across all ports 4 built-in SFP+ 10GbE uplinks Support for OpenFlow 1.3 MACsec security support

Standard Features

Software-Defined Networking

OpenFlow 1.3: Enables SDN by separating control and data planes.

Management

Remote CLI management, RADIUS/HWTACACS authentication Multiple config files, session logging, SNMP/RMON support LLDP and sFlow for network visibility Remote mirroring and management VLANs

Security

ACLs (IPv4/IPv6, VLAN, port-based) IEEE 802.1X, MAC-based authentication, port security Guest VLAN, secure management via SSH/SSL/SNMPv3 DoS protection (DHCP guard, IP source guard, ARP protection) IPv6 security: DHCPv6, ND Snooping, IPv6 source guard

Quality of Service (QoS)

Broadcast rate control, advanced classifier-based QoS SP, WRR, SP+WRR queue management Traffic policing with CAR and line rate support

Connectivity

Auto-MDIX, IEEE 802.3x flow control Up to 48x 1GbE ports, 4x 10GbE SFP+ IEEE 802.3at PoE+ and pre-standard PoE device support Ethernet OAM (802.3ah), jumbo frames up to 9KB

Performance

Non-blocking fabric (up to 216Gb/s) Wirespeed ACLs using TCAM

High Availability

IRF for simplified redundancy and high availability Smart Link failover < 100ms Spanning Tree (STP, RSTP, MSTP, PVST+) Dual internal redundant power supply (up to 1440W PoE+)

Layer 2 Switching

32K MAC table, 4094 VLANs (802.1Q), QinQ Port aggregation, DLDP, jumbo frames

Layer 3 Services and Routing

Static routing (IPv4 & IPv6), RIP v1/v2 Policy-Based Routing (PBR), ARP, DHCP, loopback interfaces UDP helper, route maps, DHCP relay/server

Convergence and Voice

LLDP, LLDP-MED, CDP compatibility Voice VLANs, IP multicast snooping (IGMP), MSDP PoE allocation via LLDP-MED, IEEE class, or manually

Manageability

Dual flash images, multiple config storage IPv6 management tools: pingv6, Telnetv6, SNMPv6, etc. Virtual cable tests for diagnostics

Warranty and Support

Limited Lifetime Warranty For details, see: HPE Warranty Summary
Software and support: HPE Networking SupportEnvironmental Specification

HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI Switch (JH323A)

Power Supply Options

HPE X361 150W 100–240VAC to 12VDC Power Supply – Model: JD362B HPE X361 150W 48–60VDC to 12VDC Power Supply – Model: JD366B

I/O Ports and Slots

24 × RJ-45 autosensing 10/100/1000 ports 4 × SFP+ 10GbE ports 1 × Port expansion module slot (supports 6 SFP+ or 2 1/10GBASE-T ports) 1 × Dual-personality console port (RJ-45 or mini USB) 1 × Out-of-band management port (RJ-45) 1 × USB 2.0 port

Power and Cooling

2 × Power supply slots (1 required) Airflow: Front (port side) to Back (power side)

Physical Characteristics

Dimensions: 17.32” W × 14.17” D × 1.72” H (1U) Weight: 7.5 kg (16.53 lb)

Memory and Performance

Memory: 2 GB SDRAM, 512 MB Flash Packet buffer: 4 MB Throughput: up to 154.8 Mpps Switching Capacity: 168 Gbps MAC Address Table: 32,768 entries Routing Table: 4096 IPv4, 2048 IPv6 Latency: < 5 µs (1G), < 3 µs (10G)

Environmental

Operating Temp: 0°C to 45°C (32°F to 113°F) Storage Temp: -40°C to 70°C (-40°F to 158°F) Humidity: 10% to 90% (operating), 5% to 95% (non-op) Acoustic: 52.8 dB (low), 66.7 dB (high)

Electrical Characteristics

Frequency: 50/60 Hz Voltage: 100–240 VAC / -48 to -60 VDC (depending on PSU) Max Power: 107 W Idle Power: 55 W Heat Dissipation: 365–392 BTU/hr Note:
- Idle power reflects device with no active ports.
- Max power and heat values are based on worst-case fully loaded configuration.

Certifications

Safety: UL 60950-1, EN 60950-1, IEC 60950-1, FDA 21 CFR, RoHS Emissions: FCC Class A, EN 55022 Class A, CISPR 22/24, VCCI, EMC Directive Immunity: EN 55024, EN 300 386

Management

CLI, Web GUI, SNMP v1/v2/v3 IMC – Intelligent Management Center compatible DHCP, Telnet, TFTP, FTP, SSH, NTP, RMON

Standards and Protocols

General Networking Protocols

IEEE 802.1 series (ad, ak, AE, AX, D, p, Q, s, v, w, X) IEEE 802.3 series (i, u, x, ab, ac, ad, ae, af, at, az, z) IPv4/IPv6: RFC 791, RFC 2460, RFC 4291, etc. Routing/ARP: RFC 826, 1812, 1256, etc. Multicast: RFC 2236, RFC 3810, RFC 4541 DHCP/BOOTP: RFC 951, RFC 2131, RFC 3046, etc.

Security Protocols

IEEE 802.1X Port Access Control MACsec (802.1AE) RADIUS (RFC 2138, 2865), TACACS+ (RFC 1492) SSL, SSHv2, SNMPv3 security models

Network Management

SNMP v1/v2c/v3 (RFC 1157, 1901–1907, 3416–3418) LLDP (IEEE 802.1AB), LLDP-MED (ANSI/TIA-1057) RMON (RFC 2819), Entity MIB, Interface MIB IMC support, CLI, Telnet, SSH, HTTP, HTTPS

QoS/CoS Support

RFC 2474, 2597, 3246, 3260 – Differentiated Services

MIBs and SNMP

MIB-II (RFC 1213), Ethernet MIBs (RFC 2665, 2668) Bridge MIB (RFC 1493), RMON (RFC 1757) Power Ethernet MIB (RFC 3621), Interface MIB (RFC 2863)