Produkty jsou vybírány dle shodných parametrů a řazeny dle skladových položek, sekundárně dle ceny vzestupně. Další produkty můžete přehledně nalézt dle parametrů v hlavní kategorii Vzdálená podpora
Processor EPYC 7313 (3.2/8C/120W/32M3200MT/s) mem max 4TB Memory 32 GB RDIMM DR 3200 MT/s (1x 32 GB Network Controller HPE 1GbE 4-port OCP3 Adapter plus choice of OCP or standup card Storage Controller P408i-a Notes: 8-Port modular Smart Array. Hard Drive None ship as standard Internal Storage 8 LFF chassis (upgradeable to 12LFF in front + 2SFF rear) PCI-Express 3-slots (x16, x16 in primary) as standard Power Supply 1x 500W HPE FlexSlot Power Supply Fans 6-standard fans Management HPE iLO Standard with Intelligent Provisioning, HPE OneView Standard (requires download) Optional Management (require licenses): HPE iLO Advanced, HPE iLO Advanced Premium Security Edition, HPE OneView Advanced Energy Star 3.0 certified Form Factor 2U Rack, LFF Easy Install rails with optional CMA Warranty 3-year parts, 3-year labor, 3-year onsite support with next business day response.
The HPE ProLiant DL345 Gen10 Plus server is redefining price/performance with the new math for virtualized compute. Powered by the latest AMDEPYC 7003 Series Processors, the HPE ProLiant DL345 Gen10 Plus server offers greater processing power, faster memory speeds up to 3200 MT/s. and increased data transfer rates with PCIe Gen4 capabilities. This 1P, 2U server has been designed with flexibility while delivering a high core count and large memory footprint. Choose this purpose-built platform for virtualization, High Performance Compute and memory centric workloads.
What's New:
Supports the latest AMD EPYC 7003 Series processor
Support for Tri-Mode storage controllers for SAS/SATA/NVMe drives
New Basic Carrier SAS/SATA/NVMe drives.
European Union (EU) Lot 9 regulation, please visit:
8 SFF with optional SFF or NVMe drive bay options
24 SFF bay with and 2 SFF rear drive bay option to total 26 SFF drives
8 LFF/12LFF chassis supporting SAS/SATA
System Fans
Standard - fan types included
The 8 LFF and 8 SFF without standard fans included.
The 24 SFF chassis ships with 6 high performance fans as standard.
Max performance fan kits are required for >280w Processors SKUs, 12LFF/24SFF configurations, NVMe drives, 2SFF rear drives, some 100GbE & 200GbE networking cards, graphics cards, InfiniBand cards or if PCIe accelerators are being used.
Standard Features
Processors - One of the following depending on model.
16 DIMM slots per processor, 8 channels per processor, 2 DIMMs per channel
Maximum capacity (RDIMM)
1.0 TB
16 x 64 GB RDIMM @ 3200 MT/S at 1 or 2 DPC
Maximum capacity (LRDIMM)
4.0 TB
16 x 256 GB LRDIMM @ 3200 MT/s at 1 DPC, 2933 MT/s at 2 DPC
Notes: The maximum memory speed is limited by the processor selection.
Memory Protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
Expansion Slots
Primary Riser
Notes:
- Bus width indicates the number of physical electrical lanes running to the connector.
- There are 2 types of risers supported on Primary Slot
Primary Riser1 (Defaulted Riser)
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
1
PCIe 4.0
X16
X16
Full-height,full-length slot
2
PCIe 4.0
X16
X16
Full-height,full-length slot
Primary Riser2*
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
1
NA
NA
NA
NA
2
PCIe 4.0
X16
X16
Full-height,full-length slot
Notes: * This riser kit cannot be selected as standalone. Must be selected along with HPE DL345 Gen10P U.3 24NVMe DA FIO Kit
Secondary Riser
Notes:
- Bus Width Indicates the number of physical electrical lanes running to the connector.
- There are 3 types of risers support on Secondary Slot
- The HPE DL345 Gen10+ 2x8 Slim Sec Riser Kit (P38643-B21) not listed here, cannot be selected as standalone. Must be selected along with HPE DL345 Gen10P U.3 24NVMe DA FIO Kit
Secondary Riser1
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
3
PCIe 4.0
X8
X16
Full-height,full-length slot
4
PCIe 4.0
X8
X16
Full-height,full-length slot
Secondary Riser2
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
3
PCIe 4.0
X16
X16
Full-height,full-length slot
4
NA
NA
NA
NA
Storage Controllers
The Gen10/Gen10 Plus controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10/Gen10 Plus Smart Array controllers visit the
HPE also launched Tri-Mode controllers which will support NVMe U.3/U.2 drives as wells as SAS/SATA drives. Please see below list for the Tri-Mode controllers supported on the server.
NVMe Boot Device
HPE NS204i-p NVMe PCIe3 OS Boot Device
Software RAID - HPE Smart Storage SR100i SR Gen10 Plus SW RAID
All models feature an embedded storage controller, capable of operating on AHCI or SR100i modes, with embedded software supporting RAID for either up to 8 SATA drives or 2 U.3 NVMe SSDs.
HPE Smart Storage SR100i SR Gen10 Plus SW RAID will operate in UEFI mode only. Legacy Mode (758959-B22) and SR100i Gen10 Plus SW RAID CAN NOT be selected together. For legacy support, and additional controller will be needed.
Embedded SATA controller by default will work in AHCI Mode. HPE Smart Storage SR100i SR Gen10 Plus SW RAID can be enabled by selecting HPE SR100i Gen10 Plus Software RAID (P28417-B21).
Supports Microsoft Windows Server only.
Notes: Requires SATA drives installed on following server/backplanes and drive bay position to support SR100i.
Part Number
Description
SR100i support
P26931-B21
HPE DL300 Gen10+ 2U 8SFF x4Tmode U.3 Kit
Up to 8 SATA drive at box 3 bay 1-8
P27194-B21
HPE DL300 Gen10+ 2U 8SFF x1Tmode U.3 Kit
Up to 8 SATA drive at box 3 bay 1-8
P38652-B21
HPE DL345 Gen10+ 8SFF BC Box1-2 Cage Kit
Up to 8 SATA drive at box 3 bay 1-8
P55516-B21
HPE DL38x Gen10+ 8SFF UBM2/TM BP Kit
Up to 8 SATA drive at box 3 bay 1-8
P38664-B21
HPE DL345 Gen10+ 8LFF CTO Server
Up to 8 SATA drives at box 2 bay 1-4 and box 3 bay 1-4
P39265-291
HPE DL345 Gen10+ 7232P 1P 32G 8LFF Server
Up to 8 SATA drives at box 2 bay 1-4 and box 3 bay 1-4
Notes: Requires NVMe drives installed on following backplanes and drive bay position to support SR100i.
Part Number
Description
SR100i support
P26931-B21
HPE DL300 Gen10+ 2U 8SFF x4Tmode U.3 Kit
Up to 2 NVMe drive at box 2 bay 5-6
P26932-B21
HPE DL300 Gen10+ 2U 8SFF x4 NVMe U.2 Kit
Up to 2 NVMe drive at box 2 bay 5-6
P27194-B21
HPE DL300 Gen10+ 2U 8SFF x1Tmode U.3 Kit
Up to 2 NVMe drive at box 2 bay 5-6
P38654-B21
HPE DL345 Gen10+ 2SFF U.3 BC BP Kit
Up to 2 NVMe drive at box 4 bay 1-2
Essential RAID Controller
HPE Smart Array E208i-a SR G10 LH Controller
HPE Smart Array E208e-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controller
HPE Smart Array P408i-a SR G10 LH Controller
HPE Smart Array P408e-p SR Gen10 Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P816i-a SR G10 LH Controller
Notes: Performance RAID Controllers require the HPE 12W Smart Storage Battery (782961-B21) which is sold separately.
HPE MegaRAID Gen10 Plus Controllers
Broadcom MegaRAID MR416i-o x16 Lanes 4GB Cache NVMe/SAS 12G Controller for HPE Gen10 Plus
Broadcom MegaRAID MR416i-p x16 Lanes 4GB Cache NVMe/SAS 12G Controller for HPE Gen10 Plus
Broadcom MegaRAID MR216i-o x16 Lanes without Cache NVMe/SAS 12G Controller for HPE Gen10 Plus
Broadcom MegaRAID MR216i-p x16 Lanes without Cache NVMe/SAS 12G Controller for HPE Gen10 Plus
HPE SmartRAID Gen10 Plus Controllers
Microchip SmartRAID SR932i-p x32 Lanes 8GB Wide Cache NVMe/SAS 24G Controller for HPE Gen10 Plus
Microchip SmartRAID SR416i-a x16 Lanes 4GB Cache NVMe/SAS 24G Controller for HPE Gen10 Plus
Internal Storage Devices
One of the following depending on model
Optical Drive
None ship standard
Hard Drives
None ship standard
Graphics
Integrated Video Standard
Video modes up to 1920 x 1200@60Hz (32 bpp)
16MB Video Memory
HPE iLO 5 on system management memory
32 MB Flash
4 Gbit DDR 3 with ECC protection
Maximum Internal Storage
Drive
Capacity
Configuration
Hot Plug SFF SAS
62.4TB
24+2 x 2.4 TB (with optional rear SFF drive cage)
Hot Plug SFF SATA
52.0 TB
24+2 x 2 TB (with optional rear SFF drive cage)
Hot Plug LFF SAS
240 TB
12 x 20 TB
Hot Plug LFF SATA
240 TB
12 x 20 TB
Hot Plug SFF SAS SSD
399.36 TB
24+2 x 15.36 TB (with optional rear SFF drive cage)
Hot Plug LFF SATA SSD
11.52 TB
12 x 0.96 TB
Hot Plug SFF SATA SSD
199.7 TB
24+2 x 7.68 TB (with optional 2SFF drive cage)
Hot Plug SFF NVMe U.3 SSD
399.36TB NVMe U.3 (All U.3)
24+2 x 15.36TB NVMe (or 2x SAS/SATA with Max. storage depending on selection for SAS/SATA/HDD/SSD)
Hot Plug SFF NVMe U.2 SSD
184.3 TB NVMe U.2 (All U.2)
24 x 7.68 TB NVMe U.2 + 2 x SAS or SATA (Max. storage depending on selection for SAS/SATA/HDD/SSD)
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94% Power Efficiency.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94%. Power Efficiency
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
Notes:
- Available in 96% Power Efficiency
- 200-240VAC power input only.
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
Notes:
- Available in 94% Power Efficiency
- 277VAC power input.
HPE 800W Flex Slot 48VDC Hot Plug Low Halogen Power Supply Kit
Notes:
- Available in 94% Power Efficiency
- -48VDC power input.
HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes:
- Available in 94% Power Efficiency.
- 200-240VAC power input only.
HPE 1600W 48VDC Power Supply Kit
HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply Kit
Notes: Available in 96% Power efficiency
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Plus Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
Notes: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server.
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 Plus servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
Secure Boot and Secure Start enable for enhanced security
Operating system specific functionality
Support for > 2.2 TB (using GPT) boot drives
USB 3.0 Stack
HPEServer UEFI/Legacy ROM
Embedded UEFI Shell
Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
PXE boot support for IPv6 networks
Workload Profiles for simple performance optimization
UEFI Boot Mode only
TPM 2.0 Support
NVMe Boot Support
iSCSI Software Initiator Support.
HTTP/HTTPs Boot support as a PXE alternative.
Boot support for option cards that only support a UEFI option ROM
Notes: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
Industry Standard Compliance
ACPI 6.1 Compliant
PCIe 4.0 Compliant
WOL Support
Microsoft Logo certifications
PXE Support
VGA/Display Port
USB 3.1 Gen1 Compliant (internal)
USB 2.0 Compliant (external ports)
Energy Star
SMBIOS 3.1
UEFI 2.6
Redfish API
IPMI 2.0
Secure Digital 2.0
Advanced Encryption Standard (AES)
Triple Data Encrytion Standard (3DES)
SNMP v3
TLS 1.2
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
European Union (EU) eco-design regulations for server and storage products, known as Lot 9, mandate that beginning on January 1st, 2024, units sold into the EU, European Economic Area (EEA), the United Kingdom, or Switzerland must include more efficient AC power supplies: 94% for multi-output and 96% for single-output. HPE Flexible Slot power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21 are 96% efficient, thus meeting requirements. HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in advance to satisfy requests with the current power supplies by the set deadline.
ASHRAE A3/A4
Notes: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae.
iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards.
The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs.
Active Health System Viewer
Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv.
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at
Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 , Gen10 & Gen10 Plus HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities.
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.
RESTful Interface Tool
RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell.
HPE OneView Standard
HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview.
HPE Systems Insight Manager (HPE SIM)
Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim.
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at:
UEFI Secure Boot and Secure Start support
Immutable Silicon Root of Trust
FIPS 140-2 validation (iLO 5 certification in progress)
Common Criteria certification (iLO 5 certification in progress)
Configurable for PCI DSS compliance
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
Support for Commercial National Security Algorithms (CNSA)
Tamper-free updates - components digitally signed and verified
Secure Recovery - recover critical firmware to known good state on detection of compromised firmware
Ability to rollback firmware
Secure erase of NAND/User data
TPM (Trusted Platform Module) 2.0 option
Bezel Locking Kit option
Chassis Intrusion detection option
Výrobci kategorie Vzdálená podpora:
Vysvětlivky, legenda
SKLADEM:
Zboží je skladem v zobrazované výši a lze ho ihned objednat a dodat na Vámi určenou adresu, popřípadě vydzvednout po domluvě přímo v našem skladě. NENÍ SKLADEM, DOSTUPNOST NA DOTAZ:
Pokud není uvedeno jinak, předpokládaná doba naskladnění je min. 14dní, prosím zavolejte 315 810 620 pro upřesnění dodání. REPAIR:
Jedná se o zboží, které je vráceno distributorem po servisním zásahu, je opravené, odzkoušené a plně funkční. U tohoto druhu zboží, pokud není skladem, nelze zjistit datum dodání a lze jen sledovat přímo na internetu. Na zboží je dána plná 2 letá záruka. POŠKOZENÝ OBAL:
Jedná se o zboží, u kterého vinou transportu došlo k poškození obalu, popřípadě originální krabice. U tohoto druhu zboží, pokud není skladem, nelze zjistit datum dodání a lze jen sledovat přímo na internetu. Aktualizace cen:
Ceny na myIT.cz se aktualizují několikrát za den v závislosti na kurzu. Veškeré nechtěné překlepy, změny cen jsou vyhrazeny.